Upcoming Bell 407 Training
Bell 407 Analog Initial
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Initial: 20 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, and anti-torque system failure procedures.
Initial: 5 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 3 students for each initial course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 Analog/GX Recurrent
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Recurrent: 8 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter. Training may be conducted during day or night. NVG training available.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, G1000 display malfunctions and anti-torque system failure procedures.
Recurrent: 2 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 4 students for each recurrent course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 GXi Recurrent
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Recurrent: 8 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter. Training may be conducted during day or night. NVG training available.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, G1000 display malfunctions and anti-torque system failure procedures.
Recurrent: 2 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 4 students for each recurrent course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 Analog Initial
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Initial: 20 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, and anti-torque system failure procedures.
Initial: 5 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 3 students for each initial course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 GXi Recurrent
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Recurrent: 8 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter. Training may be conducted during day or night. NVG training available.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, G1000 display malfunctions, and anti-torque system failure procedures.
Recurrent: 2 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 4 students for each recurrent course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 Analog/GX Recurrent
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Recurrent: 8 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter. Training may be conducted during day or night. NVG training available.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, G1000 display malfunctions, and anti-torque system failure procedures.
Recurrent: 2 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 4 students for each recurrent course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 Analog Initial
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Initial: 20 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, and anti-torque system failure procedures.
Initial: 5 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 3 students for each initial course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 GXi Recurrent
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Recurrent: 8 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter. Training may be conducted during day or night. NVG training available.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, G1000 display malfunctions, and anti-torque system failure procedures.
Recurrent: 2 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 4 students for each recurrent course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 Analog/GX Recurrent
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Recurrent: 8 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter. Training may be conducted during day or night. NVG training available.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, G1000 display malfunctions, and anti-torque system failure procedures.
Recurrent: 2 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 4 students for each recurrent course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 Analog Initial
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Initial: 20 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, and anti-torque system failure procedures.
Initial: 5 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 3 students for each initial course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 GXi Recurrent
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Recurrent: 8 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter. Training may be conducted during day or night. NVG training available.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, G1000 display malfunctions, and anti-torque system failure procedures.
Recurrent: 2 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 4 students for each recurrent course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 Analog/GX Recurrent
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Recurrent: 8 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter. Training may be conducted during day or night. NVG training available.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, G1000 display malfunctions, and anti-torque system failure procedures.
Recurrent: 2 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 4 students for each recurrent course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 Analog/GX Recurrent
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Recurrent: 8 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter. Training may be conducted during day or night. NVG training available.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, G1000 display malfunctions, and anti-torque system failure procedures.
Recurrent: 2 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 4 students for each recurrent course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 GXi Recurrent
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Recurrent: 8 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter. Training may be conducted during day or night. NVG training available.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, G1000 display malfunctions, and anti-torque system failure procedures.
Recurrent: 2 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 4 students for each recurrent course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 Analog Initial
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Initial: 20 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, and anti-torque system failure procedures.
Initial: 5 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 3 students for each initial course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 GXi Recurrent
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Recurrent: 8 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter. Training may be conducted during day or night. NVG training available.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, G1000 display malfunctions, and anti-torque system failure procedures.
Recurrent: 2 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 4 students for each recurrent course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 Analog/GX Recurrent
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Recurrent: 8 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter. Training may be conducted during day or night. NVG training available.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, G1000 display malfunctions, and anti-torque system failure procedures.
Recurrent: 2 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 4 students for each recurrent course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 Analog Initial
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Initial: 20 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, and anti-torque system failure procedures.
Initial: 5 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 3 students for each initial course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 GXi Recurrent
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Recurrent: 8 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter. Training may be conducted during day or night. NVG training available.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, G1000 display malfunctions, and anti-torque system failure procedures.
Recurrent: 2 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 4 students for each recurrent course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 Analog/GX Recurrent
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Recurrent: 8 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter. Training may be conducted during day or night. NVG training available.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, G1000 display malfunctions, and anti-torque system failure procedures.
Recurrent: 2 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 4 students for each recurrent course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 Analog Initial
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Initial: 20 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, and anti-torque system failure procedures.
Initial: 5 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 3 students for each initial course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 Analog/GX Recurrent
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Recurrent: 8 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter. Training may be conducted during day or night. NVG training available.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, G1000 display malfunctions, and anti-torque system failure procedures.
Recurrent: 2 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 4 students for each recurrent course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 GXi Recurrent
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Recurrent: 8 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter. Training may be conducted during day or night. NVG training available.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, G1000 display malfunctions, and anti-torque system failure procedures.
Recurrent: 2 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 4 students for each recurrent course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 Analog Initial
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Initial: 20 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, and anti-torque system failure procedures.
Initial: 5 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 3 students for each initial course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 Analog/GX Recurrent
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Recurrent: 8 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter. Training may be conducted during day or night. NVG training available.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, G1000 display malfunctions, and anti-torque system failure procedures.
Recurrent: 2 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 4 students for each recurrent course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 GXi Recurrent
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Recurrent: 8 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter. Training may be conducted during day or night. NVG training available.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, G1000 display malfunctions, and anti-torque system failure procedures.
Recurrent: 2 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 4 students for each recurrent course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 Analog Initial
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Initial: 20 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, and anti-torque system failure procedures.
Initial: 5 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 3 students for each initial course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 Analog/GX Recurrent
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Recurrent: 8 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter. Training may be conducted during day or night. NVG training available.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, G1000 display malfunctions, and anti-torque system failure procedures.
Recurrent: 2 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 4 students for each recurrent course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 GXi Recurrent
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Recurrent: 8 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter. Training may be conducted during day or night. NVG training available.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, G1000 display malfunctions, and anti-torque system failure procedures.
Recurrent: 2 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 4 students for each recurrent course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 Analog/GX Recurrent
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Recurrent: 8 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter. Training may be conducted during day or night. NVG training available.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, G1000 display malfunctions, and anti-torque system failure procedures.
Recurrent: 2 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 4 students for each recurrent course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 GXi Recurrent
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Recurrent: 8 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter. Training may be conducted during day or night. NVG training available.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, G1000 display malfunctions, and anti-torque system failure procedures.
Recurrent: 2 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 4 students for each recurrent course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 Analog Initial
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Initial: 20 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, and anti-torque system failure procedures.
Initial: 5 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 3 students for each initial course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 Analog/GX Recurrent
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Recurrent: 8 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter. Training may be conducted during day or night. NVG training available.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, G1000 display malfunctions, and anti-torque system failure procedures.
Recurrent: 2 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 4 students for each recurrent course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued
Bell 407 GXi Recurrent
Course Description
The Bell 407 pilot transition course objective is to provide ground training and flight training for appropriately rated helicopter pilots in order to operate the Bell 407 helicopter in a safe and efficient manner . Each pilot will be required to meet or exceed the minimum standards set forth in the applicable FAA Standards appropriate to the grade of certificate held by the pilot.
Classroom Instruction:
Provide comprehensive coverage of aircraft systems, operational characteristics, operating limitations, performance, and a review of applicable portions 14 CFR Part 91.
Recurrent: 8 hours
Flight Training:
Provides the customer with demonstration and performance of normal maneuvers and emergency procedures of the helicopter. Training may be conducted during day or night. NVG training available.
Emergency procedure training includes touchdown autorotations, hydraulic-off landings, In aircraft FADEC malfunctions with manual throttle, G1000 display malfunctions, and anti-torque system failure procedures.
Recurrent: 2 hours
Completion Standards:
To complete a course of instruction, each maneuver shall be performed at or above those standards as stated in the FAA Standards for the level of certificate held. Upon satisfactory completion of all course requirements, a Certificate of Completion will be issued. In addition, a 14 CFR Part 61.56 Flight Review may be provided.
* - In order to complete recurrent training, pilot must have previously completed initial training in airframe
** - Maximum of 4 students for each recurrent course
*** - Flight only recurrent courses are available. Upon completion of a flight only recurrent course, only a Certificate of Flight Training will be issued